CZ DUTY 4.0 C MS
About this product
Optics cuts are a recurring question on the slide pages, so start there: CZ's new DUTY 4.0 ships with a slide milled for direct-mount red dots, and CZ's own photos show Holosun, Aimpoint and Shield optics bolted straight on. Fixed sights come fitted. Under that slide is a striker-fired 9x19mm with a serialized internal chassis, which leaves the fiberglass-reinforced polymer grip frame as a modular, non-serialized part.
Two frame sizes, each with or without a thumb safety. The C compact holds 15+1 rounds, 17+1 with the extended base plate, weighs 770 g and stands 135 mm. The F full-size holds 17+1, 19+1 extended, weighs 780 g and stands 143 mm. The 4-inch barrel is not threaded. Overall length is 188 mm with a 33 mm width. The refined SFDA trigger is rated 5.6±0.9 lbs with a 4 mm reset. MS models add a manual thumb safety to the firing pin block, trigger safety and trigger bar safety. Factory MSRP sits at $729.
Where the P-10 had a serialized polymer frame, the DUTY 4.0 moves the serial number to an internal modular chassis. That is the headline. The rest follows the modern service-pistol formula done carefully: a striker SFDA trigger at 25 ± 4 N (5.6 ± 0.9 lbs) (4 mm (0.16 in) reset, 9 ± 1 mm (0.4 ± 0.04 in) travel), a 188 mm (7.4 in) long slide with direct-mount optics cuts, fixed sights and a four-inch barrel without a thread.
Compact means 15+1 rounds in a frame 135 mm (5.3 in) high. Fit the longer base plate and it holds 17+1. At 770 g (27.2 oz) unloaded it sits between a pocket pistol and a full-size gun, which is exactly where a carry-and-nightstand 9mm belongs.
A manual thumb safety is the one thing that separates this model from its sibling. It sits beside the three automatic safeties, firing pin block, trigger safety and drawbar safety, and does not change the trigger pull.
Best fit: concealed carry where your state allows it, home defense, and range time that does not need a full-size grip. Shooters coming from a CZ 75 will recognize the grip angle; owners coming from any other striker gun will notice the trigger first.
Slides and frames ship direct; a serialized pistol does not. The DUTY 4.0 goes to the FFL dealer you choose at checkout, and that dealer handles the transfer and applies your state's handgun rules at the counter. Choose a dealer close to home and confirm they take inbound transfers, then add their details to the order.
Specs at a glance
Specifications
| Caliber | 9x19mm (9mm Luger) |
| Magazine capacity | 15+1 (17+1 with the extended base plate) |
| Barrel length | 102 mm (4 in) |
| Overall length | 188 mm (7.4 in) |
| Width | 33 mm (1.3 in) |
| Height | 135 mm (5.3 in) |
| Weight (empty magazine) | 770 g (27.2 oz) |
| Frame | fiberglass-reinforced polymer |
| Trigger | SFDA striker-fired |
| Trigger pull | 25 ± 4 N (5.6 ± 0.9 lbs) |
| Trigger reset | 4 mm (0.16 in) |
| Trigger travel | 9 ± 1 mm (0.4 ± 0.04 in) |
| Safeties | Firing pin block, trigger safety, trigger bar safety, manual thumb safety |
| Sights | Fixed |
| Threaded barrel | No |
| Optics | Direct-mount optics ready |
| Manufacturer | CZ (Česká zbrojovka) |
| MSRP | $729 |
Frequently asked questions
- Which red dots fit the DUTY 4.0 slide?
- CZ's launch photos show Holosun, Aimpoint and Shield optics mounted directly to the slide. Check your dot's footprint against CZ's documentation before ordering.
- How wide is the DUTY 4.0?
- The slide and frame measure 33 mm, about 1.3 inches, on both the C and F versions.
- What does MS mean on the CZ DUTY 4.0 C MS?
- Manual safety. It adds a thumb lever to the firing pin block, trigger safety and trigger bar safety that every DUTY has.
- Does the manual safety change the trigger?
- No. CZ rates the trigger the same on both versions: 5.6 pounds with a 4 mm reset.