CZ DUTY 4.0 C
Specs at a glance
About this product
Optics cuts are a recurring question on the slide pages, so start there: CZ's new DUTY 4.0 ships with a slide milled for direct-mount red dots, and CZ's own photos show Holosun, Aimpoint and Shield optics bolted straight on. Fixed sights come fitted. Under that slide is a striker-fired 9x19mm with a serialized internal chassis, which leaves the fiberglass-reinforced polymer grip frame as a modular, non-serialized part.
Two frame sizes, each with or without a thumb safety. The C compact holds 15+1 rounds, 17+1 with the extended base plate, weighs 770 g and stands 135 mm. The F full-size holds 17+1, 19+1 extended, weighs 780 g and stands 143 mm. The 4-inch barrel is not threaded. Overall length is 188 mm with a 33 mm width. The refined SFDA trigger is rated 5.6±0.9 lbs with a 4 mm reset. MS models add a manual thumb safety to the firing pin block, trigger safety and trigger bar safety. Factory MSRP sits at $729.
This is the shorter grip of the two DUTY frames: 135 mm (5.3 in) from the top of the slide to the base plate, 770 g (27.2 oz) empty, 15+1 rounds standard and 17+1 with the extended plate. The slide and four-inch barrel are the same as the full-size gun, so it shoots like one.
No manual thumb safety here. The firing pin block, trigger safety and drawbar safety handle drop safety, and the holster handles the rest. CZ sells the same gun with a frame-mounted lever as the MS model.
The chassis is serialized and modular, which is CZ's way of making the grip module swappable. The frame itself is fiberglass-reinforced polymer, 33 mm (1.3 in) wide, on a four-inch barrel and a 188 mm (7.4 in) overall length. The SFDA trigger breaks at 25 ± 4 N (5.6 ± 0.9 lbs) and resets in 4 mm (0.16 in). Optics mount directly to the slide; the photos from CZ show Holosun, Aimpoint and Shield footprints.
Who is it for: daily carry, a nightstand gun that also rides along, and new owners who want one pistol for everything. If you already shoot a P-10, the DUTY is the next step in the same family, with a new chassis and the optics done right.
Slides and frames ship direct; a serialized pistol does not. The DUTY 4.0 goes to the FFL dealer you choose at checkout, and that dealer handles the transfer and applies your state's handgun rules at the counter. Choose a dealer close to home and confirm they take inbound transfers, then add their details to the order.
Specifications
| Caliber | 9x19mm (9mm Luger) |
| Magazine capacity | 15+1 (17+1 with the extended base plate) |
| Barrel length | 102 mm (4 in) |
| Overall length | 188 mm (7.4 in) |
| Width | 33 mm (1.3 in) |
| Height | 135 mm (5.3 in) |
| Weight (empty magazine) | 770 g (27.2 oz) |
| Frame | fiberglass-reinforced polymer |
| Trigger | SFDA striker-fired |
| Trigger pull | 25 ± 4 N (5.6 ± 0.9 lbs) |
| Trigger reset | 4 mm (0.16 in) |
| Trigger travel | 9 ± 1 mm (0.4 ± 0.04 in) |
| Safeties | Firing pin block, trigger safety, trigger bar safety |
| Sights | Fixed |
| Threaded barrel | No |
| Optics | Direct-mount optics ready |
| Manufacturer | CZ (Česká zbrojovka) |
| MSRP | $729 |
Frequently asked questions
- Which red dots fit the DUTY 4.0 slide?
- CZ's launch photos show Holosun, Aimpoint and Shield optics mounted directly to the slide. Check your dot's footprint against CZ's documentation before ordering.
- How wide is the DUTY 4.0?
- The slide and frame measure 33 mm, about 1.3 inches, on both the C and F versions.
- Does the CZ DUTY 4.0 C take CZ P-10 magazines?
- CZ lists the DUTY with its own 15-round magazine and an extended base plate for 17+1. P-10 magazine fit is not confirmed, so plan on DUTY magazines.
- Is the compact easy to shoot?
- It shares the 4-inch barrel and slide with the full-size gun, so the sight radius is the same. Only the grip is shorter.